Configuration for Blending
Instructions for Blending
1. Make sure your Cordless Blender has adequate charge (refer to the section on charging).
2. Place the food to be processed into the Blender Beaker.
WARNING: DO NOT overfill the Beaker or food may come over the top when blending.
3. Place the Beaker on a flat, level and stain resistant surface.
4. Attach the Blender Shaft to the Body, twisting clockwise to secure.
5. Supporting the Beaker with one hand lower the Blender Head (7) into the food.
6. As described in 5.9 switch ON your Blender by pressing both the Safety and Power
buttons. When operating the Indicator (1) shows BLUE. If your battery becomes low
then it changes to RED.
Lock
7