Table of Contents
Advertisement
WARNING: DO NOT operate for more than 1 minute with a 3 minute rest period and a
maximum of two cycles.
7. When you have finished using your Blender remove the Body from the Blender Shaft by
twisting it Anti-clockwise.
8. Disassemble and clean, see the Cleaning Section for guidance.
Charging Your Cordless Blender
1. When your battery needs charging the Indicator will flash RED. DO NOT continue to
use your Blender.
2. Connect your Mains Adaptor to a Mains Wall Socket.
3. Connect the DC Out socket of the Adaptor to the Charge Port (2) on the Body of the
Blender.
4. When charged the Indicator will change to BLUE. This typically takes around 3 hours.
Cleaning and Storage
Cleaning
1. We recommend you clean your appliance immediately after use to avoid the build-up of
food debris.
2. Allow the appliance to cool if necessary.
3. Remove and set aside the Body.
4. Wash the Blender Shaft (6), Blender Beaker (8), Chopper Blade (9), Chopper Lid
(10) and Chopper Bowl (11) in warm soapy water, rinse thoroughly and dry. Wipe the
Body (5) with a damp cloth.
WARNING: Take care when washing the bladed items, they are very sharp.
WARNING: Do not immerse the Body (5) or Mains Adaptor (13) in water or any other
liquid.
Storage
• Be sure that the appliance is unplugged.
• Complete all requirements for cleaning and care.
• Keep the appliance in a dry clean place out of the reach of children.
8
Advertisement
Table of Contents
