Cook's essentials 819276 Instructions Manual

Cook's essentials 819276 Instructions Manual

Cordless stick blender

Advertisement

Quick Links

INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Cook's essentials 819276

  • Page 1 INSTRUCTION MANUAL...
  • Page 3 CORDLESS STICK BLENDER Model No: 819276 Charger: 100-240V~50 / 60Hz, 0.5A Blender: 12V DC 100W FOR HOUSEHOLD USE ONLY PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE...
  • Page 4: Key Components

    At a glance INDICATOR (1) BLUE - Operating RED - Battery Low BLUE - Charged NOTE: Adaptor Supplied will be UK Mains Plug Standard. KEY COMPONENTS 1. Indicator 8. Blender Beaker 2. Charge Port 9. Chopper Blade 3. Safety Interlock Button 10.
  • Page 5: Important Safeguards

    Important Safeguards • Carefully read all of these instructions before using the appliance. • Keep your hands and utensils away from the moving blades while processing food to reduce the risk of severe injury to persons or damage to the product. • The Chopping Blades are very sharp. Please handle carefully. • To reduce the risk of injury, never place the cutting blade in the bowl without first putting the bowl properly in position on a suitable flat surface.
  • Page 6 • Avoid contacting any moving parts. • Never attempt to take food or liquid out of the bowl when the blade is moving. Always wait until the motor stops completely. • Do not overload the appliance bowl with food. • Never place hot ingredients into the Blender Beaker or Chopper Bowl (>70°C). • Children shall not play with this appliance.
  • Page 7 Chopping Configuration Lock Instructions for Chopping Make sure your Cordless Blender has adequate charge (refer to the section on charging). Remove the Chopper Bowl Lid (if fitted, twisting anti-clockwise to remove) Place the Chopper Blade on the Spigot in the base of the Bowl. WARNING: Take care when handling the Chopping Blade, it is very sharp.
  • Page 8 Refit the Chopper Lid. Align with the marks and then rotate clockwise to lock. Place the assembled Chopper Bowl on a flat, level and stain resistant surface. Attach the Blender Body into the top of the Chopper Bowl and twist clockwise to lock. WARNING: Maximum operating time cannot exceed 30 seconds and 3 minutes rest time.
  • Page 9 Configuration for Blending Lock Instructions for Blending 1. Make sure your Cordless Blender has adequate charge (refer to the section on charging). 2. Place the food to be processed into the Blender Beaker. WARNING: DO NOT overfill the Beaker or food may come over the top when blending. 3.
  • Page 10: Cleaning And Storage

    WARNING: DO NOT operate for more than 1 minute with a 3 minute rest period and a maximum of two cycles. 7. When you have finished using your Blender remove the Body from the Blender Shaft by twisting it Anti-clockwise. 8.
  • Page 11: Technical Specification

    Technical Specification Model / Model Number Cordless Stick Blender / 819276 Charger Input (Mains Adaptor) 100-240V ~ 50/60Hz 0.5A Blender 12V DC 100W Li-ion 11.1V 2200mAh Battery Charge Time (approx.) 3 hrs. Operating Time (approx.) 13 mins. Chopper - 30 sec. (3 min. rest, 2 cycles) KB Rating Blender - 1 min.
  • Page 12 Approvals This product complies with all relevant EU Directives including, LVD (European Low Voltage Directive), RoHS (Restriction of Harmful Substances) and EMC (Electromagnetic Compatibility), when installed and used in accordance with this Instruction Manual. Imported by: QVCUK, W4 5XU Manufactured by: Sourcing Boutique HK Ltd, 21st Floor, The Phoenix, 23 Luard Road, Wan Chai, Hong Kong...

Table of Contents