Download Print this page
surfacide Helios Instructions Manual

surfacide Helios Instructions Manual

Ultraviolet light disinfection system

Advertisement

Quick Links

CRATING EMITTER AND JOINERS
INTO A REUSABLE CRATE
Surfacide
®
READ AND FOLLOW THESE
INSTRUCTIONS CAREFULLY
BEFORE CRATING.
Manufactured exclusively by
PreventaMed® Technologies, Inc.
407 Pilot Ct., Suite 300
Waukesha, WI 53188
U.S. Patent No. 8,575,567
surfacide.com
Helios
Ultraviolet Light Disinfection System
844.390.3538

Advertisement

loading
Need help?

Need help?

Do you have a question about the Helios and is the answer not in the manual?

Questions and answers

Summary of Contents for surfacide Helios

  • Page 1 CRATING EMITTER AND JOINERS INTO A REUSABLE CRATE Surfacide Helios ® ™ Ultraviolet Light Disinfection System READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY BEFORE CRATING. Manufactured exclusively by PreventaMed® Technologies, Inc. 407 Pilot Ct., Suite 300 Waukesha, WI 53188 U.S. Patent No. 8,575,567 surfacide.com...
  • Page 2 1. Prepare the crate by following the UNCRATING AN EMPTY REUSABLE CRATE instructions. 2. Prepare the emitter(s) and joiner(s) by following the PACKING UP EMITTERS, MOTION DETECTOR JOINER AND TABLET HOLDER JOINER instructions. 3. Unlock the caster on the emitter. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
  • Page 3 4. Wheel the bubble-wrapped emitter into the crate with the cord side facing the back of crate and the bulbs facing to the front of the crate. Surfacide.com | CRATING IN A REUSABLE CRATE...
  • Page 4 5. Slide the board with the notch in the bottom with the bolts going through the holes. Screw the wing nuts in to secure the board. 6. Slide the second board through the bolts on the middle frame, foam facing inward toward the emitter. Secure with wing nuts. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
  • Page 5 7. The second board has a block on top, remove the block and place the joiner on the board. Replace the block and secure with wing nut. Use three pieces of cardboard as shims (spacers) to secure Joiner during shipping. 8. Place the accessory box in the crate. Surfacide.com | CRATING IN A REUSABLE CRATE...
  • Page 6 9. Place the last foam piece on the top of the emitter between the emitter and the top of the crate. 10. Fold up the ramp and close the door. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
  • Page 7 Call us toll-free at 844-390-3538 U.S. Patent No. 8,575,567 to Lyslo et al., entitled Hard-Surface Disinfection System. Other Patents Pending.Exclusively manufactured by PreventaMed® Technologies. Surfacide® and Helios™ are registered trademarks of Surfacide, LLC. Surfacide.com 12. Band the crate for extra security.