Page 1
CRATING EMITTER AND JOINERS INTO A DISPOSABLE CRATE Surfacide Helios ® ™ Ultraviolet Light Disinfection System READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY BEFORE CRATING. Manufactured exclusively by PreventaMed® Technologies, Inc. 407 Pilot Ct., Suite 300 Waukesha, WI 53188 U.S. Patent No. 8,575,567 surfacide.com...
Page 2
1. Prepare the crate by following the UNCRATING AN EMPTY DISPOSABLE CRATE instructions. 2. Prepare the emitter(s) and joiner(s) by following the PACKING UP EMITTERS, MOTION DETECTOR JOINER AND TABLET HOLDER JOINER instructions. 3. Unlock the caster on the emitter. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
Page 3
4. Wheel the bubble-wrapped emitter into the crate with the cord side facing the back of crate and the bulbs facing to the front of the crate. Surfacide.com | CRATING IN A DISPOSABLE CRATE...
Page 4
5. Place foam pieces on the emitter. 6. Use the board with the notch to center the emitter. Slide the notched board in on the bottom of the crate just above frame place foam in-between emitter. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
Page 5
7. Slide the second board just above the halo just above the frame in the middle of the crate, secure with screws. Surfacide.com | CRATING IN A DISPOSABLE CRATE...
Page 6
8. Place a foam piece on the top of the emitter between the emitter and the top of the crate. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
Page 7
9. Place the bubble wrapped joiner in the crate in front of the emitter resting on top of the bottom board and secure with a band. Surfacide.com | CRATING IN A DISPOSABLE CRATE...
Page 8
Technologies. Surfacide® and Helios™ are registered trademarks of Surfacide, LLC. Surfacide.com 12. Lift the ramp up and slide into the front of the crate and replace ramp pegs in their original holes. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com 12/2014...
Need help?
Do you have a question about the Helios and is the answer not in the manual?
Questions and answers