Page 1
UNCRATING EMITTER/S AND JOINER/S FROM DISPOSABLE CRATE Surfacide Helios ® ™ Ultraviolet Light Disinfection System READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY BEFORE UNCRATING. Manufactured exclusively by PreventaMed® Technologies, Inc. 407 Pilot Ct., Suite 300 Waukesha, WI 53188 U.S. Patent No. 8,575,567 surfacide.com...
Page 2
Inspect the damage and call your Surfacide rep at 844-390-3538. 2. Remove four screws from the corners of the crate. They are located on the front panel of the crate.
Page 3
3. Cut the band that is wrapped around the crate. 4. Remove the front panel of the crate. Surfacide.com | UNCRATING EMITTER/JOINER FROM DISPOSABLE CRATE...
Page 4
5. Remove the inside panel which is the ramp. 6. Remove the two pegs on both side of the bottom of the crate. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
Page 5
7. Place the ramp down in front of the crate, line up the holes and replace the pegs to secure the ramp in place. 8. Remove the accessory box. Surfacide.com | UNCRATING EMITTER/JOINER FROM DISPOSABLE CRATE...
Page 6
9. Cut the band that is around the joiner. 10. Remove the joiner from the crate. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com...
Page 7
11. Remove the four screws securing the upper board and remove the board. 12. Remove screws securing the lower board and remove the board. Surfacide.com | UNCRATING EMITTER/JOINER FROM DISPOSABLE CRATE...
Page 8
Technologies. Surfacide® and Helios™ are registered trademarks of Surfacide, LLC. Surfacide.com This is a disposable crate designed for a single use. Please dispose of the crate once the products have been removed. Surfacide® Helios™ Ultraviolet Light Disinfection System | Surfacide.com 12/2014...
Need help?
Do you have a question about the Helios and is the answer not in the manual?
Questions and answers