Tripp Lite DWM3270XOUT Owner's Manual page 4

1a. Mount on Wood Stud Wall
X X
• Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is
highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components.
W-C
W-A
WARNING
4
60mm
60 mm
(2.2")
() 2.4"
4.5 mm
Ø
( 3/16")
Ø
1
Find and mark the
exact location of
mounting holes
2
3
Drill pilot holes
Ensure holes are level
Screw mount
into wall