Extended reach wall-mount monitor arm with antimicrobial tape (12 pages)
Summary of Contents for Tripp Lite DWM3750S
Page 1
400x400 Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
PRODUCT REGISTRATION Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. 3 mm Hex Key Spring Arm and VESA Plate 5 mm Hex Key Wallplate 6 mm Hex Key Extension Arm...
Page 4
1a. Mount on Wood Stud Wall 30 mm (1.2”) 3 mm 0.2”) Find a wood stud location for mounting the wall mount Mark the exact location of the mounting holes Drill pilot holes Anchor Bolt Insert the two plastic covers on wall plate for decorative appearance.
Page 5
1b. Mount on Solid Brick or Concrete Block 50 mm (2”) 8 mm 0.31”) Find and mark the exact location of mounting holes Drill pilot holes Concrete Anchor Anchor Bolt Insert the two plastic covers on wall plate for decorative appearance.
Page 6
2. Attach Extension Arm onto Wallplate Tension Screw Insert the Tension Screw through the Wallplate’s bottom hole up toward the Decorative Cap. 3. Attach Spring Arm onto Extension Arm Tension Screw Insert the Tension Screw through the Extension Arm’s bottom hole up toward the Decorative Cap.
5. Attach VESA Plate with Display to Arm Assembly Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate. Align the VESA plate slide-in adapter with the spring arm connector and slide the unit onto the Arm Assembly .
7. Cable Management C H E R Connect the cables to the display, and press cable cover inward to route the cables through the space. Note: Leave slack in cable for cantilever arm movement. 8. Adjustment 2.7 - 24.9” (69 - 632 mm) 15°...