Page 1
Este manual esta disponible en español en la página de Tripp Lite: tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании...
PRODUCT REGISTRATION Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Component Checklist IMPORTANT: Ensure you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit tripplite.com/support for service. 90x53 mm Antimicrobial Tape (x1) (x1) (x1) (x1) (x9) (x1) (x1) (x1) Package M Package W M4x12 (x4)
Page 5
Assembly Cable covers should be installed from the outside of the arm in toward the wall bracket (as arrows show). The two screws found on the arm must be positioned through the slot found on the bottom of the cover.
Installation Mounting on Solid Walls 95 mm 95 mm 95 mm (3.7") (3.7") (3.7") Note: This product is designed to be installed on solid concrete or masonry walls. Ø 12 mm (Ø 1/2") WARNING Use the template Drill pilot holes. •...
Page 8
Attaching the Display Use an assistant or mechanical lifting equipment when hooking the display onto the mount and fastening the screws as shown. Firmly secure all screws. Do not over-tighten.
Page 11
Adjustment Keep the monitor arm horizontal while making spring tension adjustments. Prior to any arm movement, fully remove the hex key. (Note: DO NOT over-tighten screw.) TURN KNOB TO ADJUST LOAD CAPACITY DECREASE INCREASE To adjust a heavier display, turn knob counter-clockwise.
Page 12
Adjustment Loosen the screw for ±3° level adjustment. FuIly remove the screw for ±180° screen rotation. pivot tilt screen level/rotation Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). •...