RCF S�p�A� will not assume any responsibility for the incorrect installation and / or 10� There are numerous mechanical and electrical factors to be considered when use of this product�...
WARNING! CAUTION! For powered speakers, do cleaning only when the power is turned off� RCF S�p�A� reserves the right to make changes without prior notice to rectify any errors and / or omissions� Always refer to the latest version of the manual on...
Page 4
NX 985-A - PROFESSIONAL THREE-WAY ACTIVE SPEAKER NX 985-A is masterfully engineered from the ground up to deliver stellar audio performance for bands, DJs and rental companies� The combination of a 1�75” compression driver, 8” midrange, 15” woofer, two-channel 2100W amplifier, and constant directivity waveguides produce coherent 100°...
NX 985-A coupled on a subwoofer� HIGH-PASS - this presets activates a 60Hz high-pass filter for the correct coupling of the NX 985-A with subwoofers not provided with their own internal filter� PRESET LEDS These LEDs indicate the selected preset�...
RCF SERVICE CENTRE before connecting the speaker� This fast check will avoid any damage� In case of need of changing the voltage please call your vendor or authorized RCF SERVICE CENTRE� This operation requires the replacement of the fuse value and is reserved to an RCF SERVICE CENTRE�...
FLOOR CONFIGURATIONS Several configurations are possibile with NX 985-A; they can be placed on the floor or on a stage as main PA or placed on a subwoofer in a single or coupled configuration (reccomended subwoofer RCF SUB 8008-AS)� For system alignment refer to the documentation on www�rcf�it�...
Page 8
WARNING! CAUTION! To use this product on a subwoofer, before installing the system, please verify the allowed configurations and the indications regarding the accessories, on the RCF website to avoid any danger and damages to people, animals and objects� In any case, please assure the subwoofer which is holding the speaker is located on an horizontal floor and without inclinations�...
6. TROUBLESHOOTING THE SPEAKER DOESN’T TURN ON Make sure the speaker is switched on and connected to an active AC power THE SPEAKER IS CONNECTED TO AN ACTIVE AC POWER BUT DOESN’T TURN ON Make sure the power cable is intact and connected correctly� THE SPEAKER IS ON BUT DOESN’T MAKE ANY SOUND Check if the signal source is sending correctly and if the signal cables are not damaged�...
Need help?
Do you have a question about the NX 985-A and is the answer not in the manual?
Questions and answers