D-Link DGS-1210 Manual page 2

Note:
In the following steps granting that you already made a setup in
your DNH-100 / DNC-100 (following named as NC) and have it in use
with DAP-models, so the NC has a basic setup already.
3. Call the setup of your NC and log-in.
We recommend to use the English setup because the translation in other languages isn't fine sometimes.
- Chose English.
- Enter the username admin and your configured Admin-password.
- If necessary enter the displayed CAPTCHA.
- Click onto Login.
4. On the left go to the menu Configuration and then Create Profile.
Upper-right click onto Add Network to create a new Switch-Profile.
Note:
Switches can't be bound into AP-Profiles, also AP not into Switch-Profiles.
5. Create a newSite.
Give the site and the network a name and then click onto Next.
- 2 -