Bosch CBG934A 1 Series User Manual And Installation Instructions page 13

Table of Contents

Advertisement

Requirements
¡ An operating mode and temperature or level have
been set.
¡ A cooking time is set.
Press
​ ⁠ " End time".
1.
To set the time, press the hour display or the minute
2.
display.
a The selected value is marked in blue.
3.
Use the setting ring to delay the time.
If required, use
​ ⁠ to reset the setting value.
To confirm the set time, press
4.
5.
Press
​ ⁠ to start the operation.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
6.
If required, you can select other settings and re-
start the operation.
When the food is ready, use
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
Press
​ ⁠ on the display.
1.
Press the end time
2.
Use the setting ring to change the end time.
3.
To confirm the change, press
4.
a The change is applied.
Cancelling the end time
You can delete the set end time at any time.
Press
​ ⁠ on the display.
1.
Press the end time
2.
Use
​ ⁠ to reset the end time.
3.
Note: For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
10  Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
10.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
​ ⁠ on the display.
​ ⁠ to switch the ap-
​ ⁠ .
​ ⁠ on the display.
​ ⁠ .
To confirm the change, press
4.
a The change is applied.
9.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for up to 24 hours. The timer has its
own signal so that you can tell whether it is the timer or
a cooking time that has elapsed.
Press ​ ⁠ .
1.
To set the timer, press the relevant time value on
2.
the display, e.g. minute display "m" or second dis-
play "s".
a The selected value is marked in blue.
Set the timer using the setting ring.
3.
If required, use
​ ⁠ to reset the setting value.
To start the timer, press ​ ⁠ on the display.
4.
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
If the timer is running in the background, use ​ ⁠ to
1.
select the timer beforehand.
Press ​ ⁠ .
2.
Change the timer using the setting ring.
3.
Press ​ ⁠ to confirm.
4.
Cancelling the timer
You can cancel the timer at any time.
If the timer is running in the background, use ​ ⁠ to
1.
select the timer beforehand.
Press ​ ⁠ .
2.
Reset the timer using
3.
Press ​ ⁠ to confirm.
4.
10.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
Dishes en
​ ⁠ on the display.
​ ⁠ .
13

Advertisement

Table of Contents
loading

Table of Contents