General Tv Operation; Using The Channel List; Configuring Parental Settings; Electronic Programme Guide - Horizon Fitness 7 Series User Manual

Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key
and press OK to enter keys on the desired broadcast. This option will appear if satellite
channels are installed. Availability depends on the model of your TV and its features.
Select this mode for store display purposes. Whilst Store Mode is enabled, some items
in the TV menu may not be available. For some models Enabled with video option
Store Mode
may also be available. If this option is set, the TV will switch to store mode and the
pre-installed video file will be played back.
This setting configures the power up mode preference. Last State and Standby Mode
Power Up Mode
options are available.
OSS Displays Open Source Software licence information.
Restores the default boot logo. A confirmation message will be displayed. Select Yes
Restore Default
and press OK. This option may not be available depending on the model of your TV
Boot Logo
and its features.
Using this option you can change the device name that is used to identify your TV when
Change Friendly
connecting a device to the TV wirelessly. The default device name will be restored if the
Name
device name is left blank or first time installation is performed.
You can set your preference regarding the priority between the broadcast applications
Application
and CICAM AppMMI applications using this option. In case a CICAM is inserted into
Priority the TV and a contention occurs between the applications the priority will be given to
the selected type of application.
Sets the notification appearance preference for Dolby content. When set as On, Dolby
Dolby Notification
logo will be displayed on the screen when Dolby content is detected.
Model
Displays information such as model name, serial number, MAC address, etc.
Information
Note: Some options may not be available depending on the model of your TV, its features and the selected country in the First Time Installation.
English - 23 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the channel list. You
can edit this channel list, set favourites or set active
stations to be listed by using the Channels menu
options. Press the OK button to open the channel list.
You can filter the listed channels or make advanced
changes in the current list using the Filter and Edit
tab options. Highlight the tab you want and press OK
to see available options.
In order to add the channel you are currently watching
to the Home menu, highlight the Add to Home option
in the Edit tab in the Channels menu and press OK.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the TV>Channels menu or press
the OK button in order to open the Channels menu.
Highlight the Edit tab and press OK to see the editing
options and select the Tag/Untag channel option.
Select the desired channel on the list by pressing the
OK button while the channel is highlighted. You can
make multiple choices. You can also use the Tag/
Untag all option to select all channels on the list.
Then press Back/Return button to return to the Edit
menu options. Select Add/Remove Favourites option
and press the OK button again. Favourite channel list
options will be displayed. Set the desired list option
to On. The selected channel/s will be added to the
list. In order to remove a channel or channels from a
favourite list follow the same steps and set the desired
list option to Off.
You can use the filtering function in the Channels menu
to filter the channels in the channel list permanently
according to your preferences. For instance, using the
options of the Filter tab, you can set one of your four
favourite lists to be displayed every time the channel list
is opened. The selected filtering options will be shown
on the top of the Channels menu screen.

Configuring Parental Settings

The Parental menu options can be used to prohibit
users from viewing of certain programmes, channels
and usage of menus. These settings are located in the
Settings> System>Parental menu.
To display parental lock menu options, a PIN should be
entered. After coding the correct PIN, parental setting
options will be displayed.
Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.
Guidance: This setting enables or disables access to
some of the MHEG applications. Disabled applications
can be released by entering the right PIN.
Maturity Lock: If this option is set, the TV gets the
maturity information from the broadcast and if this
maturity level is disabled, prohibits access to the
broadcast.
Note: If the country option in the First Time Installation is
set as France, Italy or Austria, Maturity Lock's value will be
set to 18 as default.
Child Lock: If this option is set to On, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.
Internet Lock: If this option is set to ON, the internet
using applications will be disabled. Set to OFF to
release these applications again.
Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appear as greyed
out if no CI module is inserted into the CI slot of the
TV. You can change the default PIN of the CI CAM
using this option.
Note: Default PIN could have been set to 0000 or 1234. If you
have defined the PIN (is requested depending on the country
selection) during the First Time Installation use the PIN that
you have defined. In case the PIN is entered incorrectly five
times in succession, PIN entry will be blocked and it will no
longer be possible to make a new entry for 30 minutes. However,
you can unblock the PIN entry or reset the retry count to zero
by turning the TV off and on.
Some options may not be available depending on the model
and/or on the country selection in the First Time Installation.

Electronic Programme Guide

By means of electronic programme guide function of
your TV, you can browse the event schedule of the
currently installed channels on your channel list. It
depends on the related broadcast whether this feature
is supported or not.
To access the programme guide, press the Guide
button on your remote. You can also use the Guide
option under TV menu.
There are 2 different types of schedule layouts
available, Timeline Schedule and Now/Next. To
switch between these layouts highlight the tab with
the name of the alternative layout on the upper side
of the screen and press OK.
Use the directional buttons to navigate through the
programme guide. Use the Back/Return button to
use the tab options on the upper side of the screen.
Timeline Schedule
In this layout option, all events of the listed channels will
be displayed by timeline. You can use the directional
buttons to scroll through the list of the events. Highlight
an event and press OK to display event options menu.
Press Back/Return button to use available tab options.
Highlight Filter tab and press OK to see the filtering
options. To change the layout highlight Now/Next and
press OK. You can use the Previous Day and Next
Day options to display the events of the previous and
next day.
English - 24 -