ViewSonic VS19112 User Manual page 63

Item Description
Let the display detect and display available input sources
Auto Signal Detection
automatically.
Set the time period to enter Standby Mode when there is no
No Signal Standby
signal.
Enable/Disable CEC (Consumer Electronics Control).
CEC synchronizes power on/off operation via HDMI connection.
That is, if a device that also supports CEC is connected to the
HDMI with One Wire
HDMI input of the display, when the display's power is turned
off, the power of the connected device will also be turned off
automatically. When the power of the connected device is
turned on, the display's power will be turned on automatically.
HDMI EDID Version Select HDMI EDID version: EDID 1.4, EDID 2.0, Auto.
USB Cloning Save the OSD Menu configuration to the USB storage.
If set to ON, the display will copy media files from the external
USB Auto Play USB storage to the display's internal storage then play the
media files automatically.
Select the display status for the next time the power cord is
connected to a power outlet.
Power Off
The display will remain off when the power cord is connected.
Switch on State
Forced On
The display will turn on when the power cord is connected.
Last Status
The display will return to the previous power status.
WOL Enable/Disable the Wake on LAN (WOL) feature.
Assign a number to remote control the display by RS-232.
NOTE:
Monitor ID
The number range is: 1~98; 99 is reserved for "All
Displays".
Language Select OSD Menu language.
Factory Reset Reset all OSD Menu settings to default.
Advanced Reset Reset all Advanced menu settings to default.
63