Advertisement
1 5
1 6
1 7
ace the wider portion of the saw base on that part of the workpiece which
solidly supported, not on the section that will fall off when the cut is made.
E
examples, Fig. 5 illustrates the RIGHT way t o cut off the end of a board,
id Fig.
6
the WRONG way. If the workpiece is short or small, clamp
it
down.
3N'T TRY TO
HOLD
SHORT
PLACES BY HAND!
Fig. 5
Fig.
wer attempt t o saw with the
-cular saw held upside down in a
;e. This is extremely dangerous and
n lead t o serious accidents.
f
Fig:
!fore setting the tool down after completing a cut, be sure that the lower
rlescoping) guard has closed and the blade has come t o a complete stop.
7
Advertisement
