Table of Contents
Advertisement
Malfunction
"H:32"
"E:35 / -10"
burns.
Cause and Troubleshooting
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
▶ Clean the strainer in the water supply.
Water tap is closed.
Open the water tap.
▶
Water supply hose is kinked or pinched.
Make sure that the water supply hose is not
▶
kinked or pinched.
Water in the bottom tray.
Close the tap.
▶
Please contact customer service.
▶
→
"Customer Service", page 55
Device is leaking.
Close the tap.
▶
Please contact customer service.
▶
→
"Customer Service", page 55
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 35
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 27
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
Reduce the amount of detergent for the next wash
▶
with an equal load.
TroubleshootingNL
45
Advertisement
Table of Contents
