Maintenance - Makita 5007NB Instruction Manual

Maintenance
0
Replacing carbon brushes
Replace carbon brushes when they wear
down to about 6 mm (1/4")
of
spark-
ing will occur. Both brushes should be
changed
a t
the same time.
NO.
185-76
I U
6 mm ( 1
14")
Diameter
di 7 $: e ,
Part
No.
(ltlKA,
(15.88mm, 5/8" 2 0 721245-4
Fig. 12
ACCESSORIES
CAUTION
:
The accessories specified in this manual are recommended for use with your Makita Circular Saw. The
use of any other accessory might be hazardous.
0
Guide rule
(Part
No.
164095-8)
Wrench (13)
(Part No. 781
203-2)
SAW BLADE
Chisel tooth combination saw blade Carbide-tipped saw blade
Faster, smoother, longer sawing
without blade sharpening.
Cuts wood, drywall, plastics,
hard wood. etc.
For rip and cross-cut work.
Most frequently used for
general carpentry.
10