Milo Range v5 PRO System Setup Manual page 17

Speaker System Setup
1. Using the provided instructions, affix the speaker mounts to the walls of the room the system is in.
2. Using the provided hardware, attach the speakers to the speaker mounts.
NOTE: When preparing the speaker wire for installation, marking or labeling each wire on both ends
will greatly assist you during installation.
3. Using the speaker wire provided, connect each of the 5 speakers and run the speaker wire above
the ceiling and back to the instructor station.
4. Connect the speaker wire to the subwoofer.
5. Connect the speaker control console to the subwoofer.
6. Connect the speaker jacks to the
Speaker Control Console Connection
7. Please reference the MILO Range 5.1 Speaker Set Up and Realtek HD Audio Manager Settings
Guide that is in the Training & Support folder located either on your MILO Range desktop or
C/MILO/Training & Support/User Guides.
(Figure 1-??, Item ?)
subwoofer.. (Figure 1-??, Item ?).
Satellite Speaker Wire Connections
www.milorange.com