Makita 5007F Instruction Manual page 13

1 2
1. Brush holder cap
2. Screwdriver
ACCESSORIES
Use a screwdriver to remove the brush holder caps. Take out
001515
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
Combination
Pressure
treated/ Wet
lumber
Fine cross cuts
• Steel & Carbide-tipped saw blades
• Rip fence (Guide rule)
• Wrench 13
General purpose blade for fast and smooth rip,
crosscuts and miters.
Designed for fast cutting of pressure treated and
wet lumber.
For sand-free cuts cleanly against the grain.
13