Makita 5007F Instruction Manual page 10

185 mm (7-1/4”) circular saw
Hide thumbs Also See for 5007F:
Table of Contents

Advertisement

1. Switch trigger
1. Lamp switch
ASSEMBLY
1
1. Wrench
2. Shaft lock
10
Switch action
001396
1
CAUTION:
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
Lighting the lamp
001411
1
CAUTION:
Do not see the source of light directly.
Always be sure that the lamp is switched off when you
do not use the tool.
To turn on the lamp, press the "ON" side of the lamp switch.
Press the "OFF" side to turn it off.
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Removing or installing saw blade
001417
CAUTION:
Be sure the blade is installed with teeth pointing up at
the front of the tool.
Use only the Makita wrench to install or remove the
2
blade.
To remove the blade, press the shaft lock so that the blade
cannot revolve and use the wrench to loosen the hex bolt
counterclockwise. Then remove the hex bolt, outer flange
and blade.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5007F and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

5007fa

Table of Contents