Interface 9325 Installation & User Manual page 18

Duration●●●
Auto-Off►
Mode►
●Disabled
●Enabled
Timeout●●●
User Interface►
Key Actions►
●None
●Beep
Keys Up/Down►
●Range Selection
●Display Selection
●Decimal Places
●Disabled
Keys Left/Right►
●Range Selection
●Display Selection
●Decimal Places
●Disabled
Long Up/Down►
●Range Selection
●Display Selection
●Decimal Places
●Disabled
Long Left/Right►
●None
●Range Selection
●Display Selection
●Decimal Places
Interface Inc. www.interfaceforce.com
Duration sets the time after which the backlight will turn off when
Backlight Mode is set to Auto.
Auto-Off Controls whether the handheld turns itself off after a
duration without any key presses.
Mode Select Auto Off mode of operation.
Disabled will disable Auto Off.
Enabled will enable Auto Off.
Timeout display and edit the duration before the handheld turns
off without a key press when Auto Off is enabled. (Only visible
when mode is enabled.)
User Interface allows changes to be made to the way the user
interface behaves.
Key Actions choose what feedback occurs when a valid key
press is detected.
None no feedback.
Beep the sounder will issue a beep.
Keys Up/Down choose the action when the up and down keys
are pressed (When not in the menu).
Range Selection select the next Calibration Range (Only for
non TEDS devices).
Display Selection select the next Display Mode.
Decimal Places increase or decrease the number of decimal
places displayed for all displayed values using the same units as
the main display.
Disabled no action.
Keys Left/Right choose the action when the left and right keys
are pressed (When not in the menu).
Range Selection select the next Calibration Range (Only for
non TEDS devices).
Display Selection select the next Display Mode.
Decimal Places increase or decrease the number of decimal
places displayed for all displayed values using the same units as
the main display.
Disabled no action.
Long Up/Down choose the action when the up and down keys
are pressed and released after around one second (When not in
the menu).
Range Selection select the next Calibration Range (Only for
non TEDS devices).
Display Selection select the next Display Mode.
Decimal Places increase or decrease the number of decimal
places displayed for all displayed values using the same units as
the main display.
Disabled no action.
Long Left/Right choose the action when the left and right keys
are pressed and released after around one second (When not in
the menu).
None no action.
Range Selection select the next Calibration Range (Only for
non TEDS devices).
Display Selection select the next Display Mode.
Decimal Places increase or decrease the number of decimal
places displayed for all displayed values using the same units as
the main display.
15 9325 Installation & User Manual 15-402