The VMF-FMD panel, as highlighted in the application paragraph, can be used in installations of different complexity and therefore there is a need to include specific displays
to detect any anomalies or specific system functioning conditions.
ALARMS DISPLAY
The VMF-FMD panel includes the display of some anomalies which can be present in the thermostat, these faults are indicated through a string"AL" followed by a code, see
example below:
The alarm codification is represented in the following table:
Alarm code
AL3
1
In the event of a frost alarm, the flashing
SPECIFIC FUNCTIONING CONDITIONS DISPLAY
Below you will find a table briefly describing some display combinations which represent specific thermostat functioning conditions:
Symbol
18
icon will be displayed.
Symbol status
ON
ON
BLINK
ON
ON
ON
Description
VMF-FMD panel environmental probe fault
Functioning status description
Thermostat disabled
Thermostat operating mode forced by supervisor
The thermostat is outside the supervisor functioning block (maximum time 45 minutes)