Boss DUAL CUBE BASS LX Manual page 66

BT-DUAL Bluetooth indicator
EV-1-WL Bluetooth indicator (*1)
DUAL CUBE BASS LX Editor
device name
*1 To check the indicator status, quickly press the
Bluetooth button twice. The color switches between
white and blue (remaining lit up).
4.
Configure the parameters to be
controlled by the EV-1-WL (p. 67).
NOTE
¹ You can't use the DUAL CUBE BASS LX Editor and
the EV-1-WL Editor at the same time.
¹ The DUAL CUBE BASS LX and EV-1-WL
automatically connect next time they are
restarted. To connect the DUAL CUBE BASS LX
Editor, you must follow the steps in "Connection
2" each time.
¹ If the devices do not pair after one minute has
passed, pairing mode is automatically canceled.
¹ The EV-1-WL remembers the information for the
last Bluetooth device to which it was connected.
When connecting to a different device after
connecting to the DUAL CUBE BASS LX, or
when turning off the power while the Bluetooth
indicator is blinking white (not connected),
or when doing a factory reset of the EV-1-WL,
the device does not pair automatically. In this
case, go back to "Connection 1" to
configure the settings.
Lit blue
Lit white, lit
blue
EV-1-WL+
66