Boss DUAL CUBE BASS LX Manual page 54

REVERB parameters
Parameter
TYPE
REVERB TIME
PRE DELAY
EFFECT LEVEL
DIRECT MIX
LOW CUT
HIGH CUT
DENSITY
Value
Refer to REVERB types
0.1s–10.0s
0 ms–500
ms
0–100
0–100
FLAT, 20
Hz–800 Hz
630Hz–
12.5kHz,
FLAT
0–10
Explanation
Adjusts the length
(time) of reverberation.
Adjusts the time until
the reverb sound starts
to output.
Adjusts the volume of
the reverb sound.
Adjusts the volume of
the direct sound.
Sets the frequency at
which the low cut filter
begins to take effect.
When FLAT is selected,
the low cut filter has no
effect.
Sets the frequency at
which the high cut filter
begins to take effect.
When FLAT is selected,
the high cut filter has
no effect.
Adjusts the density of
the reverb sound.
54