Mackie HMX-56 Hookup Diagrams

Mackie hmx-56 matrix mixer: supplementary guide

Hide thumbs Also See for HMX-56:

Hookup Diagrams

��

This illustrates using the HMX-56 as a live monitor

mixer. Three of the Phones outputs are routed

to In-Ear Monitor (IEM) systems, and three are

routed to ampliﬁers powering monitor wedges.

Note: The output level of the Phones outputs are

higher than a standard line-level output, so turn

the Phones Level control all the way down and

then s-l-o-w-l-y turn them up until you reach a

comfortable listening level.

HMX-56

�

��

�

��

��

�

��

�

��

Table of Contents

Do you have a question about the HMX-56 and is the answer not in the manual?

Page 1: Hookup Diagrams
�� This illustrates using the HMX-56 as a live monitor mixer. Three of the Phones outputs are routed to In-Ear Monitor (IEM) systems, and three are routed to ampliﬁers powering monitor wedges.
Page 2 Four aux sends from the 1640 provide four separate mono headphone mixes to the HMX-56. The Phones output from the 1640 is connected to the Main Inputs on the HMX-56, allowing the talent to listen to the same mix as the engineer in the control room (i.e., stereo return from the DAW for overdubbing), along with their own individual headphone mix (tracking).