Advertisement
Provisioning your Gateway to your Wi-Fi home router (3/3)
#7: Close the navigation page.
You can now return to your original WiFi settings.
#8: The green indicator light will flash following step described below:
GATEWAY
From now on, the data from Gateway' s compatible devices is recorded regularly on the cloud.
Pairing the Gateway to a device (compatible, Pentair range).
#1: Make sure your Gateway is properly power supplied.
#2: Give a short push (< 0.3 sec) on the pairing button. The green and red LEDs should be flashing alternatively and
quickly. You will now have 5 minutes to complete this pairing sequence.
GATEWAY
#3: On the device to be paired, go on the pairing menu and select «Gateway» then valid or launch the pairing
procedure (depending user interface type).
#4: Within the 5 minutes duration, as soon as the LEDs stop flashing, Gateway and device are successfully paired.
< 0.3 sec
= Searching WiFi
= Searching Pentair server
= Server connected
9
Advertisement
