Specifications And Standards; First Setup - PAC 212 Install Manual

5

Specifications and Standards

Temperature
Humidity
Battery
Risk of explosion if battery is replaced by an incorrect type.
Use only 12V sealed lead acid battery.
Dispose of used batteries in accordance with local and national regulations.
Approvals, Directives and Regulations
Hereby, Comelit-PAC Limited declares that the radio equipment type residential, commercial or
light industry door entry product is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://pacgdx.com/compliance-declarations
Declaration of Conformity available on request.
6

First Setup

You will be prompted to setup the PAC 212 the first time it is switched on.
To set up the PAC 212:
1. Press and hold ⓪ for 5 seconds.
2. Press ↵ .to start setting up the PAC 212.
3. Enter the Admin PIN for this PAC 212, then press ↵ .
4. HF variant only – press ① to select OPS or ② to select OPS Lite, then press ↵ .
5. Present the required administrator token.
6. Select the system type – press ① for residential or ② for commercial, then press ↵ .
The PAC 212 is restarted and the settings are applied.
PAC 212 Access Controller Install Guide
Operating — interior equipment 0°C – 35°C
Operating for 24 hours
RoHS
WEEE
Do not discard this product along with other household waste.
It must be collected and treated separately.
10-85% RH @ 30±2°C [85±4°F]
2011/65/EU
2012/19/EU
- 8 -