System Settings - PAC 212 Install Manual

7.10.3 Edit a time profile:
1. Display the required Time Profile page.
2. Press ↵ to start editing the time profile.
The Time Period page is displayed.
3. Use ④ and ⑥ to select the time period to edit, then press ↵ .
4. Enter the start time in hour:minute format, using the 24-hour clock, then press ↵ .
5. Enter the end time in hour:minute format, using the 24-hour clock, then press ↵ .
6. Use ①-⑦ to select or deselect the days to which this time period applies, then press ↵ .
The Time Period page is displayed again.

7.11 System Settings

The PAC 212 adjusts for daylight saving time automatically, using European daylight saving rules
(2000/84/EC).
7.11.1 Set System Time
1. In the Admin menu, choose Admin › System › Time ④③①.
2. Enter the current time, in hour:minute format, using the 24-hour clock, then press ↵ .
The System submenu is displayed again.
7.11.2 Set the system date
1. In the Admin menu, choose Admin › System › Date ④③②.
The Current Date page is displayed.
2. Press ↵ to start editing the date.
3. Set Year: Enter the last two digits of the current year, then press ↵ .
4. Set Month: Enter the current month in two digit format, then press ↵ .
5. Set Day: Enter the current day in two digit format, then press ↵ .
The System submenu is displayed again.
7.11.3 Set the system language
1. In the Admin menu, choose Admin › System › Language ④③③.
2. Use ④ and ⑥ to select the required language, then press ↵ .
The System submenu is displayed again.
7.11.4 View the firmware and database versions
1. In the Admin menu, choose Admin › System › Versions ④③④.
The database (DB) and firmware (FW) versions are displayed.
2. When finished, use ↑ to exit this command.
7.12 USB
7.12.1 Load settings, flats and / or keys from USB:
1. Insert the USB drive into the USB port of the PAC 212.
2. In the Admin menu, choose Admin › USB › Load DB ④④①.
The settings, flats and / or keys are loaded.
PAC 212 Access Controller Install Guide
- 13 -