Advertisement
FUSSION 1800SA/1800S
Architect's and Engineer's Specifi cations
The active subwoofer loudspeaker system shall incorpo-
rate two 18-inch low-frequency (LF) transducers each mounted
within an individual enclosure. Each enclosure shall be con-
structed using multi-ply wood and tuned for optimum low-
frequency response. System frequency response shall vary no
more than ±3 dB from 38Hz to 120Hz measured on axis. The
loudspeaker shall incorporate a low frequency amplifi er sys-
tem capable of delivering 2500 watts over a frequency range
of 20Hz to 150Hz. The amplifi er system shall be mounted on
an aluminum heat sink suspension mounted within one of the
subwoofer enclosures. Each enclosure shall have a rectan-
FUSSION 3000
FUSSION 3000 High Pass Switch is in the "ON" position
FUSSION 1800SA
FUSSION 1800S
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
888.337.7404, fax 425.487.4337, sales@mackie.com
UK
+44.1268.571.212, fax +44.1268.570.809, uk@mackie.com
ITALY
+39.0522.354.111, fax +39.0522.926.208, italy@mackie.com
FRANCE
+33.3.85.46.91.60, fax +33.3.85.46.91.61, france@mackie.com
GERMANY
+49.2572.96042.0, fax +49.2572.96042.10, germany@mackie.com
Active, High-Output Subwoofer
gular shape and shall incorporate two handles on each side.
The subwoofer system will feature a XLR input connector and a XLR
loop-through signal connector, a speaker-level EP-type connector
designed to power the passive subwoofer cabinet, and "ON"
and "Protection" mode LED indicators. The front of the loud-
speaker shall be covered with a powder-coated, weather-resistant
perforated steel grille.
The active subwoofer loudspeaker system shall be the
Mackie Designs FUSSION 1800SA/1800S.
FUSSION 3000 High Pass Switch is in the "ON" position
FUSSION 1800S
MIXER
Electronic fi les for this product available at:
www.mackie.com
This Specifi cation Sheet
Architects' & Engineers' Specifi cations
Quick-Start Manual
Owner/Operator's Manual
Applications Guide
CADD fi les
EASE data
Mackie Designs continually engages in research related to product improvement. New material, produc-
tion methods, and design refi nements are introduced into existing products without notice as a routine
expression of that philosophy. For this reason, any current Mackie Designs product may differ in some
respect from its published description, but will always equal or exceed the original design specifi cations
unless otherwise stated. ©1999-2002 Mackie Designs Inc. All rights Reserved.
FUSSION 3000
FUSSION 1800SA
FUSSION1800.PDF
FUSSION1800AE.TXT
FUSSION1800QS.PDF
FUSSION1800ML.PDF
FUSSION1800AG.PDF
FUSSION1800.DXF
FUSSION1800.EAS
part no. 091-226-00 Rev A
4
O F 4 P A G E S
o F 6 PA G ES
Advertisement
