Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hultafors H3x360G
Summary of Contents for Hultafors H3x360G
- Page 1 H3x360G Operating instructions...
- Page 2 INCLUDED IN DELIVERY WITH THE H3x360G H3x360G 3.6V Li-ion Batteries (3450mAh) Power plug Charger Quick start guide Case...
-
Page 3: Table Of Contents
About this manual Contents 1. General information Congratulations on the purchase of your new 2. Description H3x360G! You have acquired a Hultafors 3. Technical data measuring instrument, which can make 4. Safety instructions your work easier, faster and more precise. -
Page 4: General Information
1. General information 1.1 Signal words and their meaning 1.2.2 SYMBOLS DANGER Read instructions before use. For an imminent danger that could lead to serious injury or death. WARNING Batteries and devices must not be For a possibly dangerous situation that could disposed of with household waste. -
Page 5: Description
4. Battery compartment cover 2.2 Intended use The H3x360G is a line laser that enables a single person to level and align plumb points as well as 90 degree angles horizontally and vertically. The device is designed to be preferably used indoors. -
Page 6: Technical Data
3. Technical data 3.1 Cross laser H3x360G Working range - Laser lines r = 20 m* - Receiver r = 80 m* Max. measurement tolerance - Laser lines ± 0.3 mm / m Protection class IP 54 Levelling range (typical) ±... -
Page 7: Safety Instructions
4.3 Utilization limitations the operating manual. The H3x360G is suitable for a continuous use in an • The operator shall comply with local atmosphere which can be inhabited by humans. regulations relating to safety and accident prevention regulations as well as worker •... - Page 8 • Follow the manufacturer‘s and operator‘s be opened or exposed to mechanical loads. safety instructions. • Repairs have to be exclusively performed by • Protect equipment and accessories from Hultafors. access by children. WARNING WARNING High ambient temperatures and Blinding by laser radiation can indirectly...
- Page 9 WARNING WARNING A short-circuiting or unintended use can If disposed of improperly third parties cause batteries to overheat and create can possibly be seriously injured and an injury or fire hazard. the environment polluted. The burning of plastic components generates toxic •...
-
Page 10: Laser Safety/Classification
5. Laser safety/classification 4.5.1 INTERFERENCE OF OTHER DEVICES The H3x360G projects a 360° horizontal line and BY H3X360G two 360° vertical lines. The product corresponds to Laser class 2 Although the product meets the strict according to DIN EN 60825-1:2014. -
Page 11: Getting Started
The battery charge status is shown on the display. Charge the batteries when the symbol flashes Rev: continuously on the screen. Use the charger supplied with your H3x360G. The device cannot be used whilst charging. The batteries are fully charged in approx. 3 hours. Originat 6.1 Operation with batteries... -
Page 12: Operation
The device emits three 360° lines unfavorable environmental conditions. Pulse from the outlet openings. To turn the vertical mode is active on the H3x360G when the MODE and horizontal 360° lines on and off, press the button is pressed. The laser lines flash three H and V buttons. - Page 13 7.2 Applications 7.2.4 INCLINATION 7.2.1 HORIZONTAL LEVELLING 360° 7.2.5 WORKING AT DISTANCES 7.2.2 VERTICAL LEVELLING 360° 7.2.3 90° ANGLE...
-
Page 14: Checking The Accuracy
(at least) 3 m high wall. 2. Rotate the H3x360G by 180° and mark point on wall B. • Mount the H3x360G onto a tripod at a height of approx. 1.2 m. • Position the laser at the same height approx. -
Page 15: Maintenance, Storage And Transportation
9. Maintenance, storage and transportation 180° 9.1 Cleaning • Mark the center point of 20 cm • If the reference points are on • Wipe off any dirt with a soft damp cloth. different sides of the • Check the outlet openings of the laser regularly, ca. -
Page 16: Delivery Contents And Accessories
10. Delivery contents and accessories • Protect from moisture and humidity. Dry wet or 10.1 Product contents H3x360G damp batteries before storage or before use. H3x360G Cross laser • Prior to a prolonged storage, charge the battery 3.6V Li-ion Batteries (3450mAh) to 80 % capacity (see Chapter 7 / operation). -
Page 17: Troubleshooting
11. Troubleshooting Error Possible cause Remedy Laser lines blink in one • Device outside of self-leveling • Align device horizontally. second intervals. range. Device turns off again • Battery flat. • Replace battery. immediately efter • Battery empty. • Charge battery. startup. -
Page 18: Disposal
– may not be disposed of with household waste. • Ensure proper disposal of the device and the accessories. • Observe the country-specific disposal requirements. Your Hultafors dealership will accept returned batteries as well as old equipment, and will ensure proper disposal. -
Page 19: Manufacturer's Guarantee
13. Manufacturer‘s Guarantee The manufacturer guarantees freedom from defects of the device for a period of two years, with the exception of batteries, as of the point in time the device is handed over. The guarantee is limited to repairs and/or replacements at the manufacturer‘s discretion. -
Page 20: Ec Conformity Declaration
14. EC conformity declaration Declaration of Conformity We Hultafors Group AB, Hultaforsvägen 21, Hultafors declare under our sole responsibility that the Product(s) H3x360G to which this declarations relates is in conformity with the following standards. EN 60825-1:2014 Following the provisions of Directive(s)
Need help?
Do you have a question about the H3x360G and is the answer not in the manual?
Questions and answers