Advertisement
ASSEMBLY
Recharge only with the charger
WARNING
Removing/Inserting the Battery
To remove the battery, push in the release buttons
WARNING
changing or removing accessories.
To insert the battery, slide the pack into the body
WARNING
recommended for this tool. Others
Plunger
Support
Lug
roller
Using the anti-splinter device
The anti-splinter device helps sta-
bilize the workpiece and reduce
the anti-splinter device is in-
NOTE: Do not use the anti-
Using the shoe cover
The shoe cover is used to prevent marring and scratch-
Slot
Blade
Anti-splinter
device
Shoe
Adjusting the shoe
Do not use the anti-splinter device when making bev-
-
To reduce the risk of injury, always
WARNING
wear proper eye protection marked
to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
or removing accessories. Only use accessories
Starting and stopping the tool
start
vary the speed, increase or decrease pressure
stop
to come to a complete stop before removing the
To determine the amount of charge left in the bat-
To signal the end of charge, 1 light on the fuel gauge
4
OPERATION
Fuel Gauge
Advertisement
