Fill Water Tanks - Staheli West DewPoint 331 Owner's Manual

1
Ensure you have the proper water treatment equip-
ment for your water. Contact your dealer if you have
questions.
3
Connect hose to the supply water fill valve.
Open the supply water fill valve.
5
0.5 Gallon
Chemical
Slowly open the induction valve and suction 0.5
gallons of water treatment chemical into the supply
tanks. Always add 0.5 gallons of chemical for every
500 gallons of water. (Ratio 1:1000)
39

Fill Water Tanks

2
Your water setup should be similar to the above
picture.
4
Start your water transfer pump to begin filling the
DewPoint supply tanks with water.
6
When the tanks are nearly full, reduce the flow rate
by closing the
time to equalize and finish filling. *Tip: Fill the boiler
with water and then top off the supply tanks for
longer operating time.
© 2021 Staheli West
To DewPoint
fill valve half way. Give the tanks some
Machine