2-2. The wall plate and wall bracket are 1 PRE-INSTALLATION 2-3. With the supplied spanner, loosen the bolts and already attached together with bolts remove the wall plate upon delivery. (See diagram) 1-1 OBSERVE THE CARTON OUTSIDE Please check whether the Wall Brecket Wall Plate weight capacity ofthe carton is in accordance with the net weight...
Page 3
3 INSTALLATION OF MACHINE HEAD 3-4 Turn the protector plate clockwise back to the original CAUTION:DO NOT REMOVE STOPPER on Arm until machine position and then tighten the screw firmly. head is completely installed. Arm assembly is spring loaded and could cause equipment damage and / or injury if not handled in proper manner.
Need help?
Do you have a question about the Orion H136WM and is the answer not in the manual?
Questions and answers