Table of Contents
Advertisement
Control Panel
Depending on the model, some of the following functions may not be available.
The actual control panel may differ from model to model.
Setting the Temperature
Set the temperature to COLDER before using the refrigerator for the first time. Wait two or three hours
after connecting the appliance to the outlet before storing food in the appliance.
The temperature can be adjusted from WARM to COLDEST.
• The default refrigerator temperature is COLDER.
• To lower the refrigerator temperature, turn the control knob toward COLDEST.
• To increase the refrigerator temperature, turn the control knob toward WARM.
• Only set the temperature control between COLDEST and OVER FREEZING if you want to quick freeze
foods. When quick freezing is finished, set the control back to the COLDER position. Leaving the control
set between COLDEST and OVER FREEZING for a long time can freeze items in the fresh food
compartment.
Only for quick freezing
a
For making ice
b
General setting
c
NOTE
• Compressor will start operating 7 to 10 minutes after connecting the power cord.
• When setting the control knob to OFF, the refrigerator turns off.
• When you unplugged the appliance, wait at least 5 minutes before plugging it in again.
Defrosting Mode
Using the Defrosting Mode
It is necessary to regularly defrost your
refrigerator in order to ensure effcient operation.
The frost on the surface of the freezer room
should not exceed 1/4 inches (6 mm) before
defrosting.
1
Before starting the defrosting, remove all
food from inside the refrigerator .
2
Press the defrost button
temperature control knob.
OPERATION
13
of the
a
Advertisement
Table of Contents
