Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita XST01Z
Summary of Contents for Makita XST01Z
- Page 1 INSTRUCTION MANUAL Cordless Oil-Pulse Driver XST01 IMPORTANT: Read Before Using.
-
Page 2: Specifications
SPECIFICATIONS Model XST01 Machine screw 4 mm - 8 mm (5/32" - 5/16") Capacities Standard bolt 5 mm - 8 mm (3/16" - 5/16") Impact mode (Hard) 0 - 3,200 /min Impact mode (Medium) 0 - 2,000 /min No load speed (RPM) Impact mode (Soft) 0 - 1,200 /min T mode... - Page 3 hearing protection used for appropriate conditions and the work to be performed. Use of the will reduce personal injuries. power tool for operations different from those 12. Prevent unintentional starting. Ensure the intended could result in a hazardous situation. switch is in the off-position before connecting Battery tool use and care to power source and/or battery pack, picking 24.
- Page 4 Do not incinerate the battery cartridge even if WARNING: it is severely damaged or is completely worn DO NOT let comfort or familiarity with product out. The battery cartridge can explode in a fire. (gained from repeated use) replace strict adherence Be careful not to drop or strike battery.
-
Page 5: Functional Description
Always switch off the tool before installing or • released, have the tool serviced at a Makita service center. removing of the battery cartridge. Hold the tool and the battery cartridge firmly Lighting up the front lamp •... - Page 6 When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. Characteristics of Cordless Oil-impulse Driver Makita Cordless Oil-impulse Driver hydraulically operated impact tool using oil viscosity to produce impacts. Since oil viscosity changes with the temperature, be aware of the following two points when operating the tool.
- Page 7 Impact force grade Maximum blows Application Work displayed on panel Hard Tightening in underwork 2,700 Tightening when force material / Tightening long (/min) and speed are desired. screws. Medium 2,200 Tightening when a good Tightening in the finishing (/min) finishing is needed. board, plaster board.
- Page 8 Overheat protection for tool Indicating the remaining battery capacity When tool overheated, tool stops automatically and the battery indicator shows following 1. Battery capacity state. In this situation, let the tool cool before turning the tool on again. Battery indicator Blinking Tool is overheated 014994...
-
Page 9: Operation
When it is difficult to insert the bit, pull the sleeve • and insert it into the sleeve as far as it will go. Standard bolt After inserting the bit, make sure that it is firmly • (ft lbs) (15) secured. -
Page 10: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Screw bits • Socket bits • Hook •...