Cutlery Drawer; Before Using For The First Time; Performing Initial Start-Up - NEFF S189YCX02E Information For Use

Push the lever forwards
1.
down the prongs
To use the prongs again, fold them
2.
back up.
a The prongs audibly click into posi-
tion.
9.5 Cutlery drawer
Arrange cutlery in the cutlery drawer.
Arrange cutlery with the points and
sharp edges downwards.
and fold
⁠ .
1
2
first time
10 Before using for the
first time
first time
10.1 Performing initial start-
up
On initial start-up or after a reset to
the factory settings, you will need to
make settings. The display shows the
settings for initial start-up.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 13
Add special salt. → Page 27
1.
Add rinse aid. → Page 28
2.
Switch on the appliance.
3.
a The display shows the settings for
initial start-up.
Press repeatedly until the display
4.
shows the required setting.
Note: If you select Initial start-up
Home Connect here, make further
settings using the Home Connect
app on your mobile device.
You can change the settings for
initial start-up and other Basic set-
tings → Page 37 on the appliance
at any time or use the Home Con-
nect app on your mobile device.
Press or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.
Add detergent → Page 29.
7.
Start the Programme with the
8.
highest cleaning temperature
without tableware.
first time en
repeatedly until the
for
25