Advertisement
Quick Links
QUICK SETUP GUIDE
Bluetooth Headset
NS-CAHBTEB01 / NSCAHBTEB01-B / NSCAHBTEB01-C / NS-CAHBTEB01-B-C
PACKAGE CONTENTS
• Bluetooth Headset
• USB charging cable
• Earbuds (small and large)
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• High-quality stereo sound from Bluetooth 4.0 enabled
devices
• Battery lasts 12 hours (talk), 10 hours (music)
• Inline controls easily adjust audio
• Curved design fits comfortably around the neck
Rewind/Skip back
Fast forward/Skip forward
Play/Pause
Charging port
Neck strap
Earbud (R)
Power switch
Microphone
Earbud (L)
Call button/LED indicator
Volume down
Volume up
CHARGING YOUR HEADSET
A tone sounds (every 60 seconds) and the LED
flashes red when your headset battery is low.
• Set power switch to OFF before charging.
• Connect the USB charging cable from your
headset's charging port
to a USB port.
PAIRING YOUR HEADSET
Pairing your first Bluetooth device
1 Slide the power switch to ON. The LED blinks red
and blue and the headset enters pairing mode.
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Manually pairing your Bluetooth device
1 Press and hold (call) to enter pairing mode. The
LED blinks red and blue.
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Pairing two devices
1 Pair your headset to your secondary Bluetooth
device first. See "Pairing your first Bluetooth
device" for instructions.
2 Press and hold (call) on your Bluetooth headset
to enter pairing mode.
3 Connect your primary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
4 Re-pair your secondary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
Note: When connected to two phones, the
headset calling functions will work with the
primary phone.
Disconnecting and reconnecting your paired
device
Your headset remembers up to six Bluetooth devices
and will turn off after three minutes if it is not paired
to a Bluetooth device.
TO DISCONNECT...
TO RECONNECT...
Turn off your headset
Turn on your headset. Your headset
searches for the last connected
Bluetooth device and reconnects.
Advertisement
Related Manuals for Insignia NS-CAHBTEB01-B
Summary of Contents for Insignia NS-CAHBTEB01-B
- Page 1 Bluetooth Headset information, see the documentation that came with your Bluetooth device. NS-CAHBTEB01 / NSCAHBTEB01-B / NSCAHBTEB01-C / NS-CAHBTEB01-B-C 4 On your Bluetooth device, select NS-CAHBTEB01. The LED lights blue and a tone sounds when your headset pairs to your...
- Page 2 Note: When your headset is connected to two FCC Caution which the receiver is connected. INSIGNIA is a trademark of Best Buy and its affiliated companies Bluetooth devices, calling functions work with the Distributed by Best Buy Purchasing, LLC Changes or modifications not expressly approved by the party responsible for •...