Settings - GE VTD56 Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Getting started
IMPORTANT:
Clean the lint filter
each time you use
the dryer.
DRYING
A
— This commercial dryer uses two payment methods:
1) A Commercial Laundry Coin Meter Kit to pay with coins (sold separately). To order, call GE Appliances at
1-866-531-9828 or visit us at GEAppliances.com/commerciallaundry.
Model
VKAUNICBT
VTA56CHKT
VTA56SCDT
2) An App based payment system. Using your smartphone, scan the QR code on the control panel to download the App
and see a quick tutorial on the operation of the dryer, or go to GEAppliances.com/commerciallaundry to
learn more.
B
TEMPERATURE
LOW
MEDIUM
HIGH
NO HEAT
TIME
C
— Close the dryer door and press any pad to awaken the dryer on the default cycle. Press TIME as
needed to set the desired dry time.
START
D
— Close the dryer door. Select Start/Pause (
NOTE: Opening the dryer door during operation will stop the dryer. To restart the dryer, close the door and
press the Start/Pause (
NOTE: The dryer can be paused either by opening its door or pressing the Start/Pause (
automatically cancel after 4 minutes if paused with the door closed and without input. The App will notify the user of
the available time remaining to restart the cycle before the session is canceled.
OWNER SETTINGS
To Enter Administrator Mode:
1) The coin box must be disconnected and the service lid connected.
2) Press and hold the TIME and Start/Pause (
after 10 seconds. Upon entering the Administrator Mode, all LEDs will flash.
To Set Cost (Cost Definition Mode):
1) Enter the Administrator Mode - See above section.
2) "CD" will blink in the display. Press the Start/Pause (
Definition mode.
3) To increase or decrease the cost, press any of the four available cycle pads (HIGH, MEDIUM, LOW or NO HEAT).
4) Press the Start/Pause (
To Set Drying Times (Time Definition Mode):
1) Enter the Administrator Mode - See above section.
2) "CD" will blink in the display. Press the TIME pad to select "TD" and the Start/Pause (
Time Definition mode.
3) To increase or decrease the time, press any of the four available cycle pads (HIGH, MEDIUM, LOW or NO HEAT).
4) Press the Start/Pause (
49-3000304 Rev 1
A
For delicates, synthetics and items labeled tumble dry low.
For synthetics, blends, delicates and items labeled permanent press.
For regular to heavy cottons.
For delicate items without heat. Use a TIME dry cycle.
) pad to complete the cycle.
) pads and then release them
) pad to set the selected cost.
) pad to set the selected times.
B
C
D
Description
Money Box
Coin Meter Assembly
Single Coin Drop
).
) pad to enter Cost
A
) pad. The dryer will
Connect
Disconnect
Service Lid
Coin Box
) pad to enter into the
5

Advertisement

Chapters

Table of Contents
loading

Table of Contents