Campania International LED-KIT1 Assembly Instructions

Step 1 - Connect the light (LED-LIGHT) to the 3-meter extension cord (LED-Cord) and seal the
connection with cover already installed onto the longer light cord.
1a - Every light has a long cord and a short cord attached. Please ensure the smaller cord
end has the water-tight screw cap installed.
Step 2 - Install the light and cord into the fountain. Ensure that the extension cord extends out of
the fountain.
Step 3 - Attach the loose end of the extension cord to the transformer (LED-TRANS) and seal the
connection with cover already installed onto extension cord.
LED-KIT1 - Single LED Light Kit
Image
Assembly Instructions
Assembly Instructions
Light Kit Parts List
Component
LED-LIGHT
LED-Cord
LED-TRANS
Quantity
1
1
1
rev 7/22/2022