Advertisement
Available languages
Available languages
L.dz.: DT-C2/d_zg/0114/01/11.2013
MANUFACTURER:
Person who was authorized to develop technical documentation:
Mariusz Rotuski
This is to confirm that the following products:
Impact drill, by
TRYTON
Impact drill, by
TRYTON
meet essential requirement included into the following Directives of the European Parliament and the Council:
2006/42/EC of 17 May 2006 on machinery, and amending Directive 95/16/EC (Official Journal of the EU L 157 of 9
June 2006, p. 24, as amended);
2004/108/EC of 15 December 2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC (Official Journal of the EU L 390 of 31 December
2004, p. 24-37as amended);
2011/65/EU of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (Official Journal of the EU L
and have been manufactured in accordance with the standards:
EN 60745-1:2009+A11:2010 EN 60745-2-1:2010
EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
Mariusz Rotuski
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.
EC DECLARATION OF CONFORMITY
PROFIX Sp. z o.o. ul. Marywilska 34 03-228 Warszawa Poland
, Trade and Distribution Centre PROFIX, 3, Dobra St., Łomna Las, 05-152 Czosnów
; PROFIX code:
TDW1050
; PROFIX code:
TDW1050K
220-230 V; 50 Hz; 1050 W; cl. II; n : 0-2800 rpm;
174
of
01.07.2011, p. 88);
This declaration of conformity is issued under the sole responsibility of the manufacturer.
type:
AT3230;
type:
AT3230;
o
7
Łomna Las, 21.11.2013
13 mm
Ø
Advertisement
