Advertisement
d. You now have 2 options to add inventory:
i)
Option 1 – scan the QR Code using a 2D barcode scanner (1D barcode scanners will not
work). This method will automatically add inventory to the Sumilabel software.
ii) Option 2 – manually enter the 24 digit alpha/numeric code into the software. This will also
add inventory to the Sumilabel software but is more time consuming compared to scanning
QR Code.
e. Close window which will take you back to the Inventory screen. Now click the Refresh button to
display your inventory entered into the Sumilabel software.
1 – Connect USB Cable (Included) or Ethernet Cable (optional) from SumiMark IV PLUS Marking System
to host computer.
USB Cable Connection - the flat USB end goes into any USB port on host computer. The small,
square end goes into small, square port just under the port labeled Ethernet.
Ethernet Cable Connection – connect one end to the Ethernet port on the printer (as noted
below) and the other end into the host computer's network port.
2 – Connect Power Cord (Black) from SumiMark IV PLUS Marking System to power outlet.
Step 5 – Connect Cables
Cables should be connected as shown in photo below
Ethernet Port
USB Port
Black USB Cable
Power Cord
Location
4
Advertisement
