Advertisement
STEP 2 – SUMIMARK PRINTER ASSOCIATION
Note: although the SumiMark IV PLUS printer must be installed to the Windows system level, it must
then be added to the Sumilabel application level, thus making it an "internal printer" and controlled by
the Sumilabel software.
a. Open Sumilabel Software
b. Click on the Option menu option at top. Go to Printer Options.
c. Under the System Installed Printers section (top section) you should see the SumiMark IV PLUS
printer. Double click this printer and it will move down to the Application Printers (bottom
section).
d. Click on the Default Print Settings button on the right side and ensure the following settings:
i.
Sensor Type – Continuous
ii.
Temperature – 13
iii.
Speed – 4
iv.
Use Cutter Commands – box should be checked
v.
Click OK button to save changes
e. Click on the Default box to the left of the driver information. This will ensure the SumiMark
printer will be associated with the Sumilabel software. Other printers can be used as normal.
Note: Sumilabel software is for use only with SumiMark and Sumitag products. In order to use the
Sumilabel software the IMM Server application must communicate with the Sumilabel software.
a. Open Sumilabel Software.
b. Click on the Tools menu option at the top and go to Inventory link. This will open a new window.
c. Click on IMM Server Setup button. This will open a new window.
d. Click on the Verify Settings button. This will ensure the Sumilabel software will communicate
with the IMM Server and allow SumiMark product to be added to the Sumilabel software.
Note: your SumiMark and Sumitag heat shrink spools should display a QR Code label on the spools.
This QR Code label displays both a QR code and 24 digit alpha/numeric code. These codes must be
entered into the Sumilabel Inventory module for the SumiMark system to operate. If your SumiMark
spools do not have this code, please request replacements at www.SumiSupport.com.
a. Open Sumilabel Software.
b. Click on the Tools menu option at the top and go to Inventory link. This will open a new window.
c. Click on the Add button. This will open a new window.
WITH SUMILABEL
STEP 3 – INVENTORY ACTIVATION
STEP 4 – ADD INVENTORY
3
Advertisement
