Installing The Wlan Card - Dell OptiPlex 3000 Service Manual

Steps
1. Remove the (M2x3.5) screw that secures the WLAN-card bracket and the WLAN card on the system board.
2. Slide and remove the WLAN-card bracket from the WLAN card.
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card.
4. Slide and remove the WLAN card from the WLAN-card slot on the system board.

Installing the WLAN card

Prerequisites
Se si sta sostituendo un componente, rimuovere il quello esistente prima di eseguire la procedura di installazione.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Rimozione e installazione dei componenti 21