Current Inputs - Endress+Hauser Liquiline System CA80SI Operating Instructions Manual

Liquiline System CA80SI
Endress+Hauser
Menu/Setup/Analyzer/Calibration
Function
Settings
Nominal concentration
Automatic cleaning
10.4

Current inputs

The input can be used as the data source for limit switches and logbooks, for example.
Furthermore, external values can be made available as set points for controllers.
Menu/Setup/Inputs/Current input x:y
Function
Mode
Input variable
Meas. value format
Parameter name
Input variable = Parameter
Unit of measure
Input variable = Parameter
Options Info
Factory setting For configuring the concentration of the
calibration standard solution.
Depends on the settings under Menu/Setup/
Analyzer/Extended setup/Measuring value/
Main value
Selection For specifying whether cleaning will take place
• Off before every calibration/adjustment (only in the
• On automatic mode).
Factory setting
1)
Options Info
‣
Selection
• Off
• 0 - 20mA
• 4 - 20mA
Factory setting
4 - 20mA
‣
Selection
• Parameter
• Current
Factory setting
Current
‣
Selection
• #
• #.#
• #.##
• #.###
Factory setting
#.#
‣
Customized text, 16
characters
Customized text, 16 You cannot choose the unit from a list. If you
characters want to use a unit, you must enter it here as
customized text.
Select the same current range as in the data
source (connected device).
Select the input variable.
Specify the number of decimal places.
Assign a useful name, e.g. the parameter
name that the data source also uses.
Operation
73