Setup Menu; Setting The Time - Samsung 4 Series User Manual

■ Information: Display the information for a show or channel you have
scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the Channel
List screen, and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry
you want information for, and then press the
Tools Menu appears.
3. Select Information, and then press the ENTERE button. The
Timer Viewing Info screen appears.
4. Select Change Info and press the ENTERE button to change
information, or select Close and press the ENTERE button to
close the Information screen.
■ Select All / Deselect All: You can select or deselect all channels in
the channel list.
❑ Other Channel Menu Functions
Channel Mode
Lets you select the channel list displayed when you press the
(Channel) button on your remote. For example, if you select Favorite
Channels, you will only see Favorite channels when you press the
button.
<CH>
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If the
signal is weak or distorted, fine tune the channel manually.
✎
Select the channel, and then select Fine Tune.
✎
Fine tuned channels that have been saved are marked with an
asterisk "*" on the right-hand side of the channel number in the
channel banner.
✎
To reset fine-tuning, select the channel, select Fine Tune, and then
select Reset on the Fine Tune screen.

Setup Menu

Plug & Play
Lets you re-run the Plug & Play initial setup procedure.
Language
Set the menu language.
✎
Choose between English, Español, and Français.

❑ Setting the Time

Time
✎
The time you set will appear when you press the
■ Clock: Set the clock so you can use the various timer features of
the TV.
✎
If you disconnect the power cord, you have to set the clock again.
TOOLS button. The
<CH>
button.
INFO
- 6 -
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTERE and select Auto or Manual, and then press
ENTERE again.
If you selected Auto:
The TV will automatically download the correct time from a digital
channel.
y Select Time Zone, and then press the ENTERE button. Use
the▲/▼ buttons to select your Time Zone, and then press
ENTERE.
y Select DST (Daylight Savings Time), and then press ENTERE.
Select On if you want to turn the DST adjustment on and off
manually. Select Off to turn off the DST adjustment. Select Auto if
you want the TV to adjust to DST automatically. Press ENTERE
when done.
✎
DST and Time Zone function are only available when the Clock
Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the ▲/▼ buttons to change the
values in each field or use the number buttons to enter the values
directly. Use the ◄/► buttons to move from field to field. When done
with all the fields, press ENTERE.
✎
Available only when Clock Mode is set to Manual.
■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You
can set three different on/off timer settings.
✎
You must set the clock first.
■ On Time / Off Time: Set the hour, minute, am/pm, and Activate/
Inactivate fields for On Time and Off Time. Use the ◄/► buttons to
move from field to field. Use the ▲/▼ buttons to change the values
in each field. To activate the timer with the setting you have chosen,
set the Activate/Inactivate field to Activate.
■ Volume: Set the desired loudness.
■ Contents: To select what will be turned on when the timer setting is
activated. You can set the TV to turn on a specific channel or play
back contents such as photo or audio files. Use the ◄/► buttons to
move to the Contents field, and then press the ENTERE button.
The Contents screen appears. Use the ◄/► buttons to move from
field to field. Use the ▲/▼ buttons to change the values in each field.
- TV/USB: Select TV or USB. The USB device must be connected
to your TV before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on the
USB device:
✎
The maximum number of files the TV can display, including sub
folders, in one folder of a USB storage device is 2000.
✎
The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
1. Use the ◄/► buttons to move to the field under Music or the
field under Photo, and then press the ENTERE button. The TV
displays a single folder (the Root folder) and the type or name of the
device.