ACME BK03 - Bluetooth Keyboard Manual

Overview

Installation

1. Turn on the keyboard (set power switch to the ON position).
2. Press and hold "ESC" and "K" keys for 3 seconds. The red indicator light at the bottom of the keyboard will start to blink.
3. Activate your device's Bluetooth function and set your device to search for Bluetooth devices within range, and then select "BK03" from the list of devices shown. Your device will show the pin code.
4. Enter the pin code on the BK03 and press "Enter".

Battery installation

Open the battery door and install batteries.

Storage

To extend the battery life, turn off the keyboard when unused.

This product may not work properly or pair with some specific computer Bluetooth devices.
These issues can be caused by bad software/drivers or Bluetooth hardware itself and it is not related to BK03 keyboard.

Safety instructions

• Do not disassemble the product or remove any parts.
• Do not put the product into water or any liquid.
• Do not put the product close to heat source, or expose it to high temperature.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Waste Electrical and Electronic Equipment (WEEE) Symbol

The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect contact your local authority, your household waste disposal service provider or the shop where you purchased the product.