Led Signals - MSI MS-7345 User Manual

M S-7345 M ainboard
20
D-Bracket™ 2 Connector
This connector is for you to connect to the D-Bracket™2 which integrates four LEDs and
USB ports. It allows users to identify system problems through 16 various combinations
of LED signals.
10
2
1
9
Red
Green
LED Signal Description
System Power ON
1 2
The D-LED will hang here if the
processor is damaged or not in-
3 4
stalled properly.
1 2
Early Chipset Initialization
3 4
Memory Detection T est
Testing onboard memory size. The
1 2
D-LED will hang if the memory mod-
3 4
ule is damaged or not installed
properly.
1 2 Decompressing BIOS image to RAM
for fast booting.
3 4
1 2
Initializing Keyboard Controller.
3 4
Testing VGA BIOS
1 2
This will start writing VGA sign-on
3 4
message to the screen.
Processor Initialization
1 2
This will show information regarding
the processor (like brand name, sys-
3 4
tem bus, etc...)
1 2
Testing RTC (Real Time Clock)
3 4
En-14
Connected to USB connector
LED Signal
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
1 2
3 4
D-Bracket™ 2
(Optional)
Connected to D-
Bracket 2 connector
Description
Initializing Video Interface
This will start detecting CPU clock,
checking type of video onboard. Then,
detect and initialize the video adapter.
BIOS Sign On
This will start showing information
about logo, processor brand name,
etc...
Testing Base and Extended Memory
Testing base memory from 240K to
640K and extended memory above
1MB using various patterns.
Assign Resources to all ISA.
Initializing Hard Drive Controller
This will initialize IDE drive and
controller.
Initializing Floppy Drive Controller
This will initialize Floppy Drive and
controller.
Boot Attempt
This will set low stack and boot via
INT 19h.
Operating System Booting