Audio Mode - Pyle PLML50FB User Manual

Adjust Volume (VOL)
• Rotate the VOL knob on the front panel or press the VOL+ /VOL- button
on the remote control to increase or decrease the volume level.
FUNCTION
Press the Volume knob and Rotate to select Audio/Display/Tuner/Clock/Beep/
Animation/Demo mode function. Press the Volume knob again to select desire
function mode.

AUDIO MODE

• Press the Volume knob and Rotate to select SW Level/Manual EQ/Q factor/
Preset EQ/Bass boost/Loudness/Subwoofer set/Fader/Balance/X'Over/DTA
Setting/Car type.
• Press and hold Volume knob to select 2 way/3 way X'Over mode.
SW LEVEL
Press the Volume knob and Rotate to select -13 ~ +13 level.
MANUAL EQ
Press the Volume knob and Rotate to select 25 band frequencies level.
Q FACTOR
Press the Volume knob and Rotate to select 1/1.5/2.5/3.5 different Q factor value.
PRESET EQ
Press the Volume knob and Rotate to select user/Natural/Rock/Pop/Easy/
Top 40/Jazz/Powerful.
BASS BOOST
Press the Volume knob and Rotate to select Bass boost level.
LOUDNESS
Press the Volume knob and Rotate to select Loudness level.
SUBWOOFER SET
Press the Volume knob and Rotate to switch ON/OFF.
FADER
Press the Volume knob and Rotate to select Fader position.
BALANCE
Press the Volume knob and Rotate to select Balance position.
www.PyleUSA.com
5