Troubleshooting - Pyle PLML50FB User Manual

Remote Control Operation
Position the emitting window of the remote control toward the sensor
window of the unit.
• The operation angle for front panel remote control reception is
about 30 degrees.
• The distance between the emitting window of the remote control
and the sensor window of the unit should remain less 5 meters.
• Cell leakage may cause damage to the remote control.
• Do not throw cells into as this may cause an explosion.
• Keep battery cells out of reach of children.

TROUBLESHOOTING

If you suspect something is wrong, immediately switch power off. Do not use
the unit in abnormal condition, for example without sound, or with smoke
or foul smell, can cause fire or electric shock. Immediately stop using it and
call the store where you purchased it. Never try to repair the unit by yourself
because it is dangerous to do so.
General
1. Vehicle's engine switch is not on.
• Turn your Vehicle's key to ACC or ON.
2. Cable is not correctly connected.
• Check the connection.
3. Fuse is burnt.
• Replace fuse.
4. Volume is in mute or minimum.
• Check volume or mute on/off, adjust volume to a desired level.
5. Sound skips.
• The installation angle is more than 30°. Adjust the installation angle less
than 30°.
6. The operation keys do not work.
• The built-in micro-computer is not operating properly due to noise.
Press the RESET button to restore the program to zero.
16
www.PyleUSA.com