Pyle PLML50FB User Manual page 13

4. When pairing is complete, the mobile phone audio will automatically transfer
to the ship/car audio system whenever a call is made or received, or when
the mobile phone plays music.
Make a Call
• To make a call, dial the call directly from the paired mobile phone.
• To make a call with this Wireless BT hands free system:
a. When linking up the Wireless BT-enabled mobile phone to this BT handsfree
system, press the
press the "0~9", * and # button on remote control to input the telephone
number, and the entered number will be shown on the LCD display.
b. If a number has been incorrectly inputted, press the
c. Press the button to make outgoing call.
Redial Last Dialed Number
• Press and hold the
phone number.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays
on the LCD.
• To receive the call, press the
Reject a Call or End a Call
To reject or end the call, press the
Switch Audio Between Car Audio and Mobile Phone
During a call, press the VOL knob button to switch the audio source from the
car audio system back to your mobile phone.
Adjust Talk Volume
During a call, use VOL knob or VOL+ /VOL- button to adjust the volume level.
Audio Streaming (A2DP)
1. Press the /Mode button to enter BT mode and display pause in the LCD display.
2. When a mobile device is paired, music played through that device will
automatically be heard through the car audio system.
3. Press the or
4. Press the button to pause or resume music playback.
button to access the dial telephone number mode, then
button on the control panel to redial the last dialed
button on the control panel.
button on the control panel.
button to play the next or previous on the mobile phone.
button to delete it.
www.PyleUSA.com
13